1. Home
  2. Symmetry Blog
  3. How to Select an Optimal LoRaWAN Gateway

How to Select an Optimal LoRaWAN Gateway | Symmetry Blog

Savannah Cuthbert in Blogs on October 06, 2021

About Savannah Cuthbert

Savannah Cuthbert is part of the Digital Marketing team at Symmetry Electronics. She has a Bachelor’s in Marketing from California State University, San Marcos and specializes in content strategy, copywriting, and social media planning. Using a focused approach, Savannah leverages her broad marketing experience to develop articles that showcase unique industry insights.


LoRa®, short for long range, is a wireless radio frequency technology developed by Semtech. LoRa technology was developed to offer a low power and long-range solution for battery powered Internet of Things (IoT) devices. LoRa operates in an expansive global network; offering simple integration, high capacity, affordability, and the ability to connect devices in dense urban or deep indoor environments. Symmetry Electronics is a member of the LoRa Alliance®, a non-profit association of more than 500 member companies, committed to enabling large scale deployment of Low Power Wide Area Networks (LPWAN) through the development and promotion of the LoRaWAN® (Figure 1) open standard protocol.


Figure 1: LoRaWAN architecture

Source: Semtech


What is a LoRaWAN Gateway?

At the center of a LoRa deployment, is a LoRaWAN gateway (Figure 2). LoRaWAN gateways are routers that collect data from sensors and devices that then transfer the data (RF packets) over to a network server. Gateways do not read or interpret the data that is collected. Instead, they hold the data and send them to the cloud at a desired cadence. The cadence is determined by how often the end-device wakes up to send and receive data. Depending on the application, intermittent data transfers could be beneficial for best performance and efficiency. Conversely, an application like temperature monitoring could require a more consistent data transfer. A single LoRaWAN gateway is capable of supporting 1,000s of devices. However, factors like data rate and data packet size must be considered to ensure optimal performance. Large scale LoRaWAN deployments typically run on more than one gateway. Utilizing multiple gateways helps address harder to reach areas and adds a layer of resiliency in the event that a gateway fails.


Figure 2: Gateway diagram

Source: Semtech LoRaWAN Academy


Items to Consider When Selecting a LoRaWAN Gateway

There are a number of factors to consider when selecting the ideal gateway for your specific use case. In addition to the following, it is highly advised that a system undergoes extensive testing to ensure the best outcome:

  1. Application
  2. Indoor/Outdoor
  3. Field Coverage
  4. Data Transmission
  5. Capacity
  6. Backhaul
  7. Interoperability
  8. Security
  9. Budget


Public vs. Private LoRaWAN Networks

There are pros and cons to utilizing public or private LoRaWAN networks. However, depending on the application and desired outcomes, one option could be paramount to the other.

  • Public Networks - For those seeking simplification and the ability to scale rapidly, a public network may be ideal for you. Public networks are able to handle mass amounts of data and offer extensive coverage in hard-to-reach places. This option is typically less costly than private networks, as it requires less infastrucucture from the user. A sophisticated public network offering is Helium’s The People’s Network, that offers a peer-to-peer wireless network that is incentivized via HNT cryptocurrency and protected by powerful Helium Blockchain technology.
  • Private Networks - For those seeking more control and security, a private network option may be best for you. Although this method can be more complicated to install, private networks allow you to easily monitor traffic without having to rely on a third party. With control over gateway capacity, the user can increase system efficiency and ensure access to remote areas. Users also have the ability to utilize their own firmware to customize functionality. Additionally, this method allows for more flexibility for edge computing


Selecting Your LoRaWAN Gateway

Often used in applications like smart buildings, smart cities, smart homes, and industrial IoT (IIoT), LoRaWAN gateways are a crucial aspect of a LoRaWAN deployment. Users must consider important factors like data rate, data packet size, and other desired outcomes to ensure best performance and long-term interoperability. Testing prior to deployment is also highly advised to avoid costly re-designs. Consult with Symmetry Electronics’ knowledgeable Applications Engineers to determine which gateway is best for your application.


Featured LoRaWAN Gateway Solutions

 

Semtech, LoRa and the LoRa logo are registered trademarks or service marks, and LoRa Basics, LoRa Cloud and LoRa Edge are trademarks of service marks, of Semtech Corporation or its affiliates. 

Share

Savannah Cuthbert in Blogs on October 06, 2021

About Savannah Cuthbert

Savannah Cuthbert is part of the Digital Marketing team at Symmetry Electronics. She has a Bachelor’s in Marketing from California State University, San Marcos and specializes in content strategy, copywriting, and social media planning. Using a focused approach, Savannah leverages her broad marketing experience to develop articles that showcase unique industry insights.

Subscribe

Stay up to date with industry and supplier news!

Browse

See all tags